DLS

alpine_logo

DLS XM20

• Number of channels 2
• Amplifier class AB
• Peak power 2 x 100 Watt
• Mono bridge mode 4 ohm 170 Watt
• Output power in 2 ohm 2 x 80 Watt
• Output power in 4 ohm 2 x 56 Watt vid 1% THD, 2 x 50 Watt vid 0,05% THD
• Damping factor > 80
• S/N ratio, A-weighted > 90 dB
• Frequency range 20 Hz – 30 kHz
• Input sensitivity 0,25 – 5 Volt
• Input impedance 22 kohm
• Input impedance, high level 220 ohm
• High pass filter 50 – 500 Hz
• Low pass filter 50 – 500 Hz
• Grand bass filter Bass EQ +6dB / +12 dB @ 50 Hz
• Low level output No
• High level input with auto start Yes
• Power consumption (idle) 0,4 A
• Power consumption (max) 25 A
• Rec. power cable 16 sq mm ( 5 AWG)
• Fuses 1 x 25 A
• Dimension (W x D x H) 189 x 210 x 46 mm ( 744″ x 8,26″ x 1,81″)
• Weight 2 kg


DLS XM40

• Number of channels 4
• Amplifier class AB
• Peak power 4 x 100 Watt
• Output power in 2 ohm 4 x 80 Watt
• Output power in 4 ohm 4 x 56 Watt @ 1% THD, 4 x 50 Watt @ 0,05% THD
• Mono bridge mode 4 ohm 2 x 170 Watt
• Damping factor >80
• S/N ratio, A-weighted >90 dB
• Frequency range 20 Hz – 30 kHz
• Input sensitivity 0,25 – 5 Volt
• Input impedance 22 kohm
• Input impedance, high level 220 ohm
• High level input with auto start Yes
• Remote bass level control No
• Low level output No
• Remote phase shift control No
• Low pass filter 50 – 500 Hz ( Ch 1,2,3,4)
• High pass filter 50 – 500 Hz (Ch 1,2,3,4)
• Grand bass filter Bass EQ @ 50 Hz: +6db / +12 dB
• Power consumption (idle) 0,5 A
• Power consumption (max) 50 A
• Rec. power cable 16 sq mm ( 5 AWG)
• Fuses 2 x 25 A
• Dimension (W x D x H) 189 x 322 x 46 mm (7,44″ x 12,67″ x 1,81″)
• Weight 3 kg