JL-AUDIO 10W0V3

jl_10w0v3_01

FeaturesSide view of 10W0v3-4 subwoofer

Dynamic Motor Analysis (DMA): DMA is JL Audio’s proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, 10W0v3-4 motors display linear force over a long excursion range, and also maintain a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.

Elevated Frame Cooling: The elevated frame design of the 10W0v3-4 delivers cool air through slots directly above the top plate to the voice coil. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Rear Gasket: The woofer has a rear gasket to provide an optimal seal when installing into the enclosure.

Long Excursion: The 10W0v3-4 subwoofer has 11.4mm of linear excursion, giving you louder bass with less distortion.

 


Specification

Size 10 -inch
Impedance 4 ohms
Cone Material Polypropylene
Surround Material Foam
Free-Air No
Dual Voice Coil No
Sensitivity 84.07 dB at 1 watt 
Frequency Response 25 – 250 Hz
RMS Power Range (Watts) 75-300
Peak Power Handling (Watts) 600
Top Mount Depth (inches) 4 15/16
Bottom Mount Depth (inches) N/A
Cutout Diameter or Length (inches) 8 7/8
Vas (liters) 31.01
Fs (Hz) 32.09
Qts 0.604
Xmax (millimeters) 11.4